ZIQI Compressor For Global Energy Saving, Welcome To Contact Us.
008615026767628

Full-Domain Marketing Expert & Compressed Air Systems Engineer
ZIQI Compressor Group · Updated June 2026
As a leading air compressor manufacturer, ZIQI designed the GA-AL All-in-One series specifically for laser cutting assist gas applications. This integrated screw compressor is the standard choice and is trusted by a leading Chinese top-tier fiber laser cutting machine manufacturer.
The core requirements for compressed air in laser cutting are high-pressure stability (0.7-1.6 MPa at the airend) and low oil/moisture content to prevent irreversible lens contamination. The GA-AL integrates the airend, motor, air tank, refrigerated dryer, and precision filters into a single compact housing. Equipped with an Ingersoll Rand airend and WEG IE4 motor, it is the standard choice for top-tier laser cutting machine integrators in China, perfectly covering 1.5-12kW entry-to-mid-power lasers. For ultra-high-power applications above 15kW, the GAH two-stage series (2.0-3.0 MPa) is required.
In laser cutting, compressed air serves as the assist gas, coming into direct physical contact with the cutting head's internal lenses and nozzles. This makes it a unique scenario where repair costs far exceed equipment price differences.
Oil Contamination: Even microscopic oil droplets will instantly fog or burn onto the protective lenses. This damage is irreversible and leads to extremely high repair costs.
Moisture: Water vapor causes slag accumulation and oxidation on the cut edges, which is highly problematic for sensitive materials like stainless steel and aluminum.
Particulate Matter: Dust and solid particles can block the nozzle, severely compromising cutting precision.
The GA-AL features a comprehensive integrated design. The airend, motor, cooling system, control unit, air tank, refrigerated dryer, and precision filters are entirely housed within a single enclosure. This Plug-and-Play architecture is pre-tested and pre-commissioned at the factory; users only need to connect the power and air pipelines. Reducing external piping connection points directly minimizes leak risks and mitigates pressure drops.
Airend: Utilizes an Ingersoll Rand airend featuring a 5:6 ratio asymmetric rotor design.
Motor: Powered by a WEG IE4 high-efficiency motor with IP55 protection and Class F insulation.
Dryer: Comes standard with a Refrigerated Air Dryer, providing a reliable Pressure Dew Point (PDP) of approximately +3°C.
Filter: Equipped with 0.01μm multi-stage precision filters to ensure high-purity compressed air tailored for laser cutting. (Note: for strict Class 0 oil-free requirements, refer to our OFW series).
The system can be equipped with an optional VSD energy-saving module — see our VSD Screw Air Compressor technology — and IoT monitoring, dynamically adjusting the air output based on demand, achieving up to 30% in energy savings. Furthermore, the enclosed housing with specialized soundproofing restricts operational noise to an ultra-quiet 62±2 dB(A).
| Target Laser Power | ZIQI Model Series | Recommended Pressure (MPa) | Air Displacement (m³/min) | Core Configuration |
|---|---|---|---|---|
| < 3kW (Entry-Level) | GA-3.7AL ~ GAS-7.5AL | 0.8 - 1.3 | 0.35 - 1.2 | WEG IE4 Motor, Ingersoll Rand Airend |
| 3kW - 8kW (Mid-Range) | GAS-11AL ~ GAS-15AL | 1.3 - 1.5 | 1.0 - 2.0 | Integrated Refrigerated Dryer (+3°C PDP) |
| 8kW - 12kW (Mid-High) | GAS-18.5AL ~ GAS-22AL | 1.5 - 1.6 | 1.5 - 2.5 | 0.01μm Multi-stage Precision Filter |
| 15kW - 20kW+ (Ultra-High) | GAH Series (Two-Stage) | 2.0 - 3.0 | 1.73 - 3.30 | Direct Drive, Dual-stage Compression |
For laser power exceeding 12kW, GAH two-stage compression is recommended to deliver the higher pressure and flow demands of high-power cutting heads.
The GA-AL comes standard with a refrigerated dryer offering a PDP of approximately +3°C, satisfying the vast majority of entry-to-mid power laser cutting scenarios. For high-power fiber lasers (typically 8kW and above), certain cutting head manufacturers demand lower dew points (e.g., -40°C) to combat the instantaneous gas expansion cooling effect during high-speed cutting, preventing condensation from reforming. If -40°C PDP is required for ultra-high-power lasers, a desiccant dryer upgrade is recommended as a post-treatment stage, rather than replacing the primary compressor system.
| Factor | GA-AL Integrated System | Modular Split System |
|---|---|---|
| Footprint | Compact single enclosure | Larger, requires separate component spacing |
| Installation | Plug-and-play, pre-tested at factory | On-site assembly and piping required |
| Leak Risk | Minimized (fewer external joints) | Higher (more piping connections) |
| Best For | 1.5-12kW workshops with space constraints | High-power facilities (15kW+) needing component-level service access |
Actual cutting head air pressure is typically 8-15 bar (0.8-1.5 MPa), depending on material thickness and laser power. The GA-AL series covers 0.7-1.6 MPa, satisfying the vast majority of 1.5-12kW fiber laser cutting machine requirements.
No. The GA-AL is a micro-oil screw compressor equipped with a 0.01μm multi-stage precision filter to achieve high-purity compressed air suitable for laser cutting. However, under the ISO 8573-1 standard, it is typically classified as a Class 1 or Class 2 oil carryover level. If your application strictly requires Class 0 certification (e.g., medical or electronics), we recommend the ZIQI OFW oil-free screw compressor series.
The GA/GAS series utilizes an Ingersoll Rand airend featuring a 5:6 ratio asymmetric rotor design. (Note: Within the ZIQI product line, only the GB series uses our customized proprietary airend).
The standard configuration includes a refrigerated air dryer with a PDP of approximately +3°C, suitable for most entry to mid-power applications. If your high-power laser cutting head (typically 8kW+) requires a -40°C or lower dew point, an optional desiccant dryer upgrade is required as a post-treatment stage.
The GA-AL series (GA-3.7AL to GAS-22AL) covers 1.5kW to 12kW entry-level to mid-power fiber laser cutting machines. For ultra-high-power applications above 15kW, the GAH two-stage compression series (2.0-3.0 MPa) is recommended.
An integrated system consolidates the airend, air tank, dryer, and filters into a single enclosure. It is pre-tested at the factory, meaning customers only need to connect power and the main air pipe. This significantly reduces on-site installation time and external piping joints (lowering leak risks and pressure drops). It is ideal for small to medium workshops with space constraints. Large-scale high-power facilities may prefer modular systems for component-level service access.
It features a fully enclosed, soundproofed housing design that keeps operational noise strictly controlled at 62±2 dB(A), making it highly suitable for noise-sensitive workshop environments.
Yes. An optional VFD (Variable Frequency Drive) and IoT monitoring module can be equipped to dynamically adjust air output based on actual laser cutting load variations, yielding energy savings of up to 30%.
Explore our complete engineering analysis sheets and component documentation across related compressed air technology:
ISO 8573-1:2010 Compressed Air Purity Classes
ISO 1217:2009 Displacement Compressors Acceptance Tests
Fiber Laser Cutting Head Manufacturer Air Quality Specifications (Industry Standard)
Tell us your laser power (kW), cutting material, and required dew point. ZIQI engineers will recommend the exact GA-AL model or GAH configuration promptly.
Copyright © 2026 ZIQI Compressor (Shanghai) Co., Ltd - All rights reserved.